Art Project Tutorial 3: Using Apoxie Clay in Bookmaking
By Lynne Suprock
Creative clay inspiration began a while back... in kindergarten and elementary
school art class days. My favorite was the air dry grey colored clay. With it, I made elephants, hand print plaques, and a few mugs. (Oh my!)
Since then, there have been so many sculpting products developed for
art use. My current favorite is the
Apoxie Clay from Aves. https://www.avesstudio.com I’ve used Aves
products in my design work with students, making tiaras and altering
glass bottles.
As well, I took a workshop with Michael DeMeng, while I working
at an Art Is You event in 2012, and became exposed to the “creature factor” as
another way to use this epoxy clay product ….how fun!
So, the thing is, this stuff is terrific to use for creating altered
book plates and making little book pendants! Being able to stamp into it, mold
it, and have it adhere to almost anything, makes it work very well as a creative medium. These are some of my little books featured in
PAGES, a Cloth-Paper-Scissors publication that shows how yummy the stamping
actually does look.
In 2013 I created a larger version of Apoxie Clay book, with
movable parts, for a workshop that unfortunately was cancelled due to schedule
conflicts. These books actually had draw bridges and doors.
Below there samples of a few little books made with metal and an Apoxie Clay binding. They are similar to the one seen in this summer's issue of BelleArmoire Magazine in an article collaboration with art sister, Cat Kerr. www.stampington.com
Here are samples of other books using this wonderful product!
SOME TIPS:
For all of the books shown, I used either Aves Apoxie
Clay Sculpt or Apoxie Super White. These clays are a 2 part epoxy type that air dries and hardens, noticeably so in just 2
hours.
When working with 2 part Epoxy
Clay, always wear gloves. It will absorb
into the skin in its malleable state. The clay is very sticky as well, so work
on a non stick craft mat.
Choose a surface to adhere the clay such as heavy cardboard,
chip board, balsa wood or metal. Something
with a little tooth is good. However, I
used 24 G copper for my book plates, so I sand the metal first.
When using your rubber stamps to make impressions in the
clay, make sure to use a mold release spray prior to stamping.
Be sure to clean your stamps with a
toothbrush, warm water and a little dish soap when you are finished. Otherwise,
the hardened clay will stick into the crevices of your rubber stamp.
If painting, use a thin coat of white gesso to prime the
clay once it is dry first, and paint it with acrylics.
For depth and dimension, use a little
Rub-N-Buff or Guilder’s Paste over the acrylics on parts that are raised from
stamping in the clay. You may seal with
a matte or gloss liquid gel media, but it is not necessary.
Follow me on FB where you can instant message me with any questions.
Stay tuned for Segment Five with more stories, images, and tips throughout the weeks and months ahead.
4 comments :
Stunning work love your books Lynne the ones in belle amoire
A Brilliant POST!
Thank you Jen and Sue! I am glad you guys liked. I enjoyed the sharing. :-)
What a great product, thanks for sharing! I love your little books too! <3
Post a Comment